Appliance Repair West River Maryland

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
MAYTAG DISHWASHER
Model MDB8959SKB0
Near West River, MD 20778
Mitchell H.
Job Details: 07/18/2022
cx complaint unit showing f9e1 on screen. inspected unit and confirmed. filled unit and unit stopped didnt wash or do anything at all. cancelled cycle and drain pump was humming over and over then eventually drained water out. new pump is somehow bad again. checked power from control and was 120. power good just a bad pump again. wash motor would not come on in normal or test mode. power from control ordering sump. control and drain pump for return visit. please reschedule when parts arrive.; ordrng 1 W11410070 (control) and 1 W11416363 (sump and motor) and 1 W11412291 (drain pump)
We serviced a
KITCHENAID REFRIGERATOR
Model KBFN502ESS02
Near West River, MD 20778
David J.
Job Details: 07/14/2022
Cx complaint leds are out. Inspected unit and found most of leds are out. Unit falls under s code S84638 for all 12 multipoint leds. Ordering parts for return visit. ; ordrng 12 W11484836 (Multipoint Led lights)s
We serviced a
MAYTAG DISHWASHER
Model MDB8959SKB0
Near West River, MD 20778
Mitchell H.
Job Details: 07/13/2022
cx complaint unit not working. installed new drain pump and tested. unit is now draining and starting cycles. job completed.
We serviced a
MAYTAG DISHWASHER
Model MDB8959SKB0
Near West River, MD 20778
Mitchell H.
Job Details: 07/11/2022
cx complaint unit is showing f8e4. inspected unit and confirmed. found f8e4 and f9e1 storred. checked drain lines and made sure was clear and no kinks. all check good. drain pump just humming not turning at all. could not get water out of dishwasher and didnt want to flood the kitchen so ordering drain pump and will make sure to have vaccum on return visit if its me; ordrng 1 W11412291 (drain pump)
We serviced a
WHIRLPOOL OVEN
Model KSDB900ESS5
Near West River, MD 20778
Shane B.
Job Details: 06/07/2022
complaint is all burners having large yellow flames. confirmed complaint. i found unit has not been converted to run on LP. i converted all cooktop burners and regulator for LP. adjusted flame height. all burners now look good. unit is working as designed.