Per previous diag I was able to access and replace the FC door. I then verified that the gasket was sealing against the cabinet. Job complete

Cx complaint is that the gasket will not stay in place on either door. Upon arrival I was able to press the gasket into the track and get it to stay in place on both doors. I then pulled on the gasket the entire way around and found that it si now staying seated. Job complete.

"cx complaint unit is not turning on. inspected unit and found neutral wire came out of wing nut at termal block. I was able to redo both neutral, L1 and ground. I then founbd unit was stickint out from cabinet. i was able to readjust power wire and drain hose to get unit to sit flush in cabinet. tested unit and found unit now checks good."