CX complaint: unit not starting. Tested and verified complaint. UI not powering up. A couple times the door lock indication light lit up but no other LEDs lit up. Power and start buttons unresponsive. We do have 120 vac into control but only getting mV to UI. Ordering ACU and UI (just in case). Cannot reschedule due to SO part; ordrng 1 W11626077 (HMI) and 1 W11627413 (ACU)

"Cx complaint is unit not cooling properly. Tested insepcted and verifed complaint. Found the evap to be leaking on the left side. Ordering evap, called office to rescheudle as soon as possible.; ordrng 1 W10836706 (evaporator)"

"Replaced evaporator, compressor, drier and installed coupler per prior diagnosis. Ressure tested with nitrogen and found no leaks. Vac'd down to 30in for 15mins and then filled with 4.25oz of R134a. Final low side pressure was dead at 0. Unit is now cooling. INformed CX about 12hrs for unit to get to temps because it was already slightly cooled. Job is complete"