"cx complaint unit not spinning or agitating. checked unit to find f6e3, f1e2, and f7 code. checked to find slider magnet no longer positioned properly. replaced slider and tested unit working as designed. cx pif"

"replaced control, tested, unit working as designed."

"cx compliant unit not cleaning good. checked unit. found f0e3 overload code, advised cx on loading procedures, and cycle usage, also cx using powder detergent. advised to try liquid detergent, and run 2 clean cycles to clear detergent, ohmed components, found small resistance to ground O and P wires to ground indicating failure in wire harness.; ordrng 1 W11568984 (harness)"

cx complaint the unit is leaking out of the door panel area and also the protectant film is missing on the door panel.found the dispenser leaking rinse aid between the two door panels. unit needs a new dispenser. also the protectant film at the bottom of the oter panel is missing. the unit needs a new dispenser and outer panel. parts on order. will return once the parts come in.; ordrng 1 W11461682 (outer panel) and 1 W11412300 (dispenser)

replaced damper and tested unit working as designed.