Appliance Repair Seven Valleys Pennsylvania

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Seven Valleys, PA 17360
Sal R.
Job Details: 07/20/2022
CX cpomplaint was that the unti would heat but not tumble. I was able to access the drum assembly and foun d that bthe belt torn. I inspected the idler and the motor pulley and found them to be in good opperational shape. I replaced the blet and unit now test good.; used 1 4392065 (Repair kit) from stock
We serviced a
WHIRLPOOL DISHWASHER
Model WDT970SAHZ0
Near Seven Valleys, PA 17360
Sal R.
Job Details: 07/05/2022
CX complai t is that the unit is no longer washing dishes. I found that the sump & motor has failed and well as the rack adjusteres have broken. I quoted CX for the cost of parts. in the ampount of $559.98. I collected $120.00 for service charges via credit card. CX will call office if a repair is wanted.
We serviced a
WHIRLPOOL RANGE
Model WGE745C0FS01
Near Seven Valleys, PA 17360
Sal R.
Job Details: 07/05/2022
"Per the previouse tech, I was abel to access and replace the tglass cooktop and both door gaskets. CX asked about cleaning techniques in reffance of the new glass cooktop. I advised CX to use a cooktop glass cleaner and micro fiber cloath to clean cooktop. I ad vised CX to not use a razor blade to scrape the cooktop clean . UNit test good."
We serviced a
WHIRLPOOL RANGE
Model WGE745C0FS01
Near Seven Valleys, PA 17360
Drew B.
Job Details: 06/17/2022
cx complaintt hat unit had the underneath cracked on cooktop by the large right burner casue possible by the thermal crack and no signs of anything chipping or had hit the top to casue and also the gakste on the doors are flarring and need replaced ordering parts call o reschd with cx.; ordrng 1 W10877558 (cooktop) and 1 W10337392 (gaskt-door upper) and 1 WPW10269069 (gasket door lower)
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KBS0
Near Seven Valleys, PA 17360
Drew B.
Job Details: 06/08/2022
cx complaint that unit is not draining i foudn debris in pump casuing slow drain.. replaced pump and tested npw checks good. and if cx calls bck pre id control