Appliance Repair Salisbury Maryland

VIA INC Rated 5.0 out of 5 stars based on 3 customer reviews

We serviced a
AMANA DRYER
Model NED4655EW1
Near Salisbury, MD 21801
Andrew W.
Job Details: 10/19/2022
Cx complaint is dryer not working. inspected and verified complaint. found the door switch was broken. replaced door switch from pre id parts and tested unit again. unit is working as designed. job complete
We serviced a
MAYTAG WASHER
Model MVWC465HW3
Near Salisbury, MD 21804
Andrew W.
Job Details: 10/17/2022
"Per prior diagnosis, replaced parts ordered by prior tech. also asked cx about what they were experiencing and cx stated the problem occurs during light and heavy loads only. cx described a light load as 2 sets of delicates and a set of pajamas. informed cx that this may be too light of a load and to let more accumulate and she would likely see a difference in the issues experienced. tested unit and unit passed with no issues. calibrated unit also. unit is working as designed. job complete"
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW3
Near Salisbury, MD 21804
Michael E.
Job Details: 10/14/2022
"CX complaint: not spinning out clothes. Tested and verified complaint. I found rust had gotten into inlet valve and was clogging it up. I replaced the inlet valve assembly, tested unit and it is now working properly. Job is complete"
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Salisbury, MD 21804
Michael E.
Job Details: 10/14/2022
CX complaint: not spinning clothes out. Tested and verified complaint. F8E1 error code. Inspected inlet valve filter and it was clear. Both valves closed at the wall. It appears CX has been closing water valves when unit not in use. We have gretat water flow from both valves into unit. I believe this error happened due to wall valve being only partially opened. Unit is working properly. Job is complete
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADM9
Near Salisbury, MD
Michael E.
Job Details: 10/13/2022
"CX complaint: top rack parts not staying in position Tested and verified complaint. I found 1 wheel had not been locked into poisition properly. I correcteed the upper rack parts, tested unit and it is now working properly. Job is complete"
Salisbury, Maryland
10/24/2022
Overall Experience
Harry C
Salisbury, Maryland
07/28/2022
Very good experience.
Overall Experience
Salisbury, Maryland
06/22/2022
Mike us very knowledgeable and explains every aspect of the service
Overall Experience