replaced door on dishwashertested unitunit working as intended

Customer complaint unit Ui is only displaying whirlpool logo and then shuts off. I tested the unit and found the unit is not booting up the unit needs a UI. Corrupted data in UI or shorting. The unit needs new UI. Collected in full.; ordrng 1 W11297709 (console 401.50)

"Inspected unit, Found the rails were frosted from air leak in gasket and unit not leveled creating gap in door. releveled fridge, adjusted door and thawed out rails. Unit now works as intended. cx happy."

"Replaced all parts ordered and Leveled unitput unit into diag mode. ran test 57, unit cleared with 01Ran test 56, confirmed no im fault codesran test 45 confirmed im fills good.unit working as designed"

"CX complaint:door adjar warning noise all the timeInspetcted unit, confirmed cx complaint. found the tang under the bottom drawer that makes contact witth the door switch loose. screw was backed out. resecured screw and tang then tested unit. unit now working as intended."