Inspected the unit. Found that the cx is saying that the Dishwasher is finishing the cycle within 5 - 15 mins. Ran Service Diagnostics on the unit. Error Codes are F9E1 = Product not draining. Removed all Water from the Drain Hose. Blew Drain Hose out. Tested the unit. Unit is now Draining. ( Water Line is leaking at the Joint. Please see Sd Pictures if any questions. Advised the cx that they need to replace the Water Inlet Line. ) Unit is working as Designed.

Installed the Freezer Door Slides. Tested the Door. Unit is working as Designed. ( Cx paid in full by Card for Labor.)

cx comlant. water inmachine. Prior dianosis found unit needs control and pump. Installed and tested . Working as deignd. job completed RB

"CX compant. freezing in frezer.inspeedunit and found sowy build up in freezer . Unit will need freezer rails not in stock . CX owes 110 labor on retur; ordrng 2 w11658403 (slide 111.66)s, ordrd 1 00-55-141 (grind ring)"

"Cx complaint unit is not draining. Inspected unit found barely any water goes through drain line. Disposal knockout clear. Tested drain pump reading open. Ordering drain pump, and control.; ordrng 1 W11462456 (drain pump) and 1 W11659647 (control)"