Appliance Repair Mount Wolf Pennsylvania

VIA INC Rated 5.0 out of 5 stars based on 1 customer reviews

We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Mount Wolf, PA 17347
Fred G.
Job Details: 07/19/2022
cx complaint unit grinds while in a wash cycle. inspected unit and filled the tub up with water. manually put unit in a slow and fast agitation and i could hear the grinding. i was able to access unit and replace the gearcase and splutch as per previous tech. calibrated unit and ran a auto test with no noise hear. filled tub up with water and agitated unit and heard no noise. unit checks good.
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Mount Wolf, PA 17347
Sal R.
Job Details: 07/12/2022
I was able to access and replace the control board. I then ran a recalibration and a auto test. Unit test good.
We serviced a
WHIRLPOOL DISHWASHER
Model WDP370PAHB1
Near Mount Wolf, PA 17347
Drew B.
Job Details: 07/11/2022
cx complaintt hat unit is making noise when the drain is attwmpting to run and cx states not draining water out very well.. i foudn the the pump propeller was anot sested all the way making for improper drainage and noise when running. i was able to push propellar back on secriely and tested full functions.
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Mount Wolf, PA 17347
Sal R.
Job Details: 06/27/2022
"CX complaint is that the unti is making a loud metalic grinding noise. I was able to enter diag mode and found no error code stored in diag. I ran a auto test and mauel test 3 High &low Spin, heavey & gental agitation. I was not able to recreat the grinding noise. Per Technical Service Pointer #: W11520474 , I am ordering 1 control board (W11170319). Once the part is avalible , please have someone form the office call ot set a return date.; ordrng 1 W11170319 (control board)"
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Mount Wolf, PA 17347
Sal R.
Job Details: 06/27/2022
"CX complain t is that the utni has a F2E2 error code. I was able not able to us the UIO console. I unplugged the unit and then attempted to try again. I found I was not able to access and control funtion at the UI. I am orderign 1 UI console (W11478526). Once the part is avalible, please hve someone form the office call ot set a return date. Control will be used on return if needed.; ordrng 1 W11478526 (UI panel)"
Stewart
Mount Wolf, Pennsylvania
07/27/2022
Ex service
Overall Experience