Appliance Repair Milton Delaware

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
KITCHENAID REFRIGERATOR
Model KRSF705HPS00
Near Milton, DE 19968
Michael E.
Job Details: 10/19/2022
CX complaint: leaking from RC. Tested and verified complaint. I found drip pan under RC evap holding water. Drain tube in back had a piece of foam in it but was otherwise clear. Fishing with a small drain snake and plastic zip tie i could not get the clog dislodged. The clog is in the horizontal portion of drain and i could not get snakes to the clog. Called WPTL SR Unit is unrepairable. Job is complete
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Milton, DE 19968
Michael E.
Job Details: 10/14/2022
"Replaced lid latch and control as per previous diagnosis. Calibrated, then tested unit and it is now working properly. Job is complete"
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Milton, DE 19968
Michael E.
Job Details: 10/14/2022
"Replaced lid latch and control as per previous diagnosis. Calibrated, then tested unit and it is now working properly. Job is complete"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ08
Near Milton, DE 19968
Michael E.
Job Details: 07/15/2022
CX complaint: freezing on the top 2 shelves. Tested and verified complaint. RC thermistor tested at 4.3kolms but was at 72 degrees. At tghat temp it should have been around 450 olms. Ordering RC thermistor WPW10384183. Scheduled return visit for 7/22 AM prefered; ordrng 1 WPW10384183 (thermistor)
We serviced a
WHIRLPOOL WASHER
Model MVWC565FW2
Near Milton, DE 19968
Frederick R.
Job Details: 07/09/2022
"CX complaint is WM making loud noises. Inspected/tested unit and could not verify complaint. Pulled no error codes and rain a test cycle, drain and spin and individual spin, agitate and drain. I did find the drain hose installed about 16in down inside standpipe. so I corrected that. Checked underneath unit for any oil or damaged parts and found none. In conversation with the CX she told me she does mix laundry with talls and sheets etc. Verified POP as 4/1/22. After tsting and inspection i find the unit is working properly and as designed. Job is complete"