Appliance Repair Millersville Maryland

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ06
Near Millersville, MD 21108
Kevin P.
Job Details: 07/21/2022
arrived and cx answered the door stating the unit was diagnosed as a compressor and the unit is being replaced. no service
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW3
Near Millersville, MD 21108
Kevin P.
Job Details: 07/19/2022
"cx complaint unit not spinning clothes out, found oeversuds error, off balance error, and motor fault error. hiub driver is stripped out not enegaging outer basket to spin. installed new hub driver from van stock and unit tests good. 225.16 total collected by cc. job complete.; used 1 W10528947 (hub driver) from stock"
We serviced a
WHIRLPOOL RANGE
Model WEG750H0HZ0
Near Millersville, MD 21108
Kevin P.
Job Details: 07/19/2022
"cx complaint unit has cosmetic defect, called trade care to document issue and they are inspecting and shipping a new part to us. #1536982782 order number and we will reschedule once it arrives; saved tckt"
We serviced a
WHIRLPOOL WASHER
Model MVWB765FW0
Near Millersville, MD 21108
Alexander D.
Job Details: 07/18/2022
"cx complaint unit giving f8e1 error again, worked fine for 3weeks after last tech recalibrated unit. ran diagnostics f0e3 overload, f8e1 long fill, f0e5 off balance load errors stored. test cycle runs good, good water flow coming in through both valves. pressure hose is clear and no leaks. sounds like control issue, cx said he tried replacing control, and it gave him f3e1 error so he put old one back on and returned new one. not sure if distributor is reputable cx said he didnt calibrate new control also found its been a long time since they ran cleaning cycle with affresh. called techline to document. advised cx to run 2 cleaning cycles with affresh in a row and call back if issue persists. if cx calls back, mandatory preid control(W10920541). "
We serviced a
KITCHENAID DISHWASHER
Model KDFM404KPS0
Near Millersville, MD 21108
Kevin P.
Job Details: 07/15/2022
"cx complaint unit not powering on, verified voltage good at junction and control 118 vac and 12.7 vdc to u.i.. installed new panel w/ u.i. and unit tests good, job complete"