Upon arrivalunit is still working properly. Replaced control board per prior diagnosis. Programmed control to 1720. Tested unit after repair and is working as designed. Job is complete

"CX complaint is temp issues and door seal. Inspected and found both RC gaskets to be defective. Also damper was not opening properly and getting stuck making a loud clacking noise. Replaced damper from VS and right gasket. Ordering gasket for left door. 40 in stock at Tribles. Rescheduled CX for monday 4/24 am preferred. Third Part Billing; ordrng 1 W10830162 (gasket-fip) and 1 WPW10594329 (control FRVS), used 1 WPW10594329 (damper FRVS) from stock"

Cx complaint is drain pump not shutting off. Tested inspected and verified complaint. Found the unit will go into diag but not start a diag cycle. Unit has error code for long drain. Pressure hose is clear. Unit is empty of water. Ohmed drain pump from control and got 20.8ohms. Cannot reschedule at this time.; ordering 1 W11513246 (control)

Replaced the UI overlay and dispenser control per prior tech diagnosis. Could not get any function from UI in order to program it. Made sure cooling wasn't turned off and control lock was off. Unit has interior lights and 120vac coming into control. Ordering main HV control. Coming back with valve and IM. Cannot reschedule due to part availability; ordering 1 WP67006390 (box- hv co)

CX complaint is DW dispenser door not opening. Inspected/tested and verified voltage going to dispenser. Replaced dispenser from pre-id. Also set hi loop for CX drain since he was complaining about odor. Tested unit after repair and it is now working as designed. Job is complete