unit needs fan has power but doesnt spin; ordrng 1 WPW10359880 (motor-evap)

dryer noise during cycle removed drum inspected rollers confirmed moving freely check idler not moving as free replaced tested confirmed heating and no noise

replaced thermisor and element tested heating up to 196f and cycling down to 115f than back up without shutting off

dryer cutting off during cycle on timed dry tested and unit did cycle off temp set to high moving air through vent to outside temps set on high cycling off at 146f than lowered ordering control thermistor and heating element; ordrng 1 WP8577274 (thermistor) and 1 WP3387747 (heater) and 1 W11525996 (control)

fridge ice bin clumping inspected found ice on bottom on mold removed found chute blocked by ice cleared water chute and oce from bottom of mold reset power to fridge let ice maker cycle no water running over mold now paid by check for serivce call