Appliance Repair Marriottsville Maryland

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
MAYTAG DRYER
Model MGD8000AW0
Near Marriottsville, MD 21104
Ricky E.
Job Details: 07/18/2022
"customer stated that the unit wasnt functioning.. verified issue and fnd units ui frozen... reset power and fnd no errors stored. tested unit, unit cks ok.."
We serviced a
MAYTAG WASHER
Model MHW5500FC1
Near Marriottsville, MD 21104
Ricky E.
Job Details: 07/18/2022
customer stated the units ui not accepting changes and will not always start.. the unit will need the ui assy. no errors stored...; ordrng 1 W10911044 (panel-cntl)
We serviced a
WHIRLPOOL COOKTOP
Model KICU509XBL00
Near Marriottsville, MD 21104
Dustin F.
Job Details: 07/05/2022
"CX Complaint: Cooktop Not Working after tripping breaker.Replaced Module and UI display, Tested unit. Works as intended. Job COMPLETE"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHV00
Near Marriottsville, MD 21104
Brian R.
Job Details: 06/27/2022
cx complaint is ice maker stopped working and now unit is shutting down at times and he has to reset breaker to make it work again. said unit cools great. unit is O-O-W and he knows. all lights and fans check. took temp readings of -1 in Freezer 38 in FF and 5 through ice maker. turned unit back on after test mode and unit would start back up. cx had to reset breaker. cx said unit needs to be off a few min then when turned back on it startsd.for icemaker found heater not working and line froze. heater wires lose and coming off. secured with metal tape. gave cx quote and he wants to call whirlpool about this. cx will pay service for today.; ordrng 1 W11087201 (Refrigerator Heater 75.97) and 1 W10843055 (Main Control 229.81)
We serviced a
MAYTAG DRYER
Model MEDB765FW0
Near Marriottsville, MD 21104
Justin S.
Job Details: 06/23/2022
cx says the unit is very loud when in use. found the unit is making a lot of excess noise. the blower wheel has seperated itself from the mounting nut. had to chisel off the blower wheel to remove it. replaced the blower wheel and tested. the unit is now spinning blowing and heating good without any odd noises. the unit is now good