"cx concern intially was a noise , a squeeking noise.. Now it doesnt turn on, found l1 wire burned up on the harness of unit .. unit needs wire kit, hardware kit and terminal block. returning rollers and idler for noise.. scheduled with office; ordrng 1 279393 (nut kit) and 1 279318 (harness kit) and 1 WP3397659 (terminal)"

"Installed new gearcase and tested unit, Job complete"

"Unit fill tube frozen again, cx has had this happen multiple times , will last for 4-6 months then freeze again.. Cleared fill tube and tested IM.IM cycling and now filling with water .. Ordering door and 2tech ..; ordrng 1 LW11026425 (lh door)"

"Installed new fc fan, control and gasket . Tested unit.. Job complete"

"CX Complaint is unit is making alot of noise. Inspected unit and found error F6E3 ACU cant hear MCU ran diag cycle and unit and found the unit is making noise pulled unit and found the rotor screw has come out of rotor found ware on slider, Replaced and tighten screw down good unit is now working properly."