Appliance Repair Leacock-Leola-Bareville Pennsylvania

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
AMANA WASHER
Model NTW4516FW3
Near Leacock-Leola-Bareville, PA 17540
Justin L.
Job Details: 10/18/2022
Cx complaint unit not locking. Was able to access unit and found lid latch failure. Replaced with pre-id calibrated and tested unit now operates as designed
We serviced a
AMANA WASHER
Model NTW4516FW3
Near Leacock-Leola-Bareville, PA 17540
Justin L.
Job Details: 10/18/2022
Cx complaint unit not locking. Was able to access unit and found lid latch failure. Replaced with pre-id calibrated and tested unit now operates as designed
We serviced a
WHIRLPOOL WASHER
Model MVWX655DW1
Near Leacock-Leola-Bareville, PA 17540
Justin L.
Job Details: 07/15/2022
"Cx complaint of unit making noise and not agitating properly. Was able to access unit and found no saved codes. Ran through diagnostic with no issues. Checked under unit and found gearcase leaking oil. Ordering necessary parts and once approved the office will need to set a return with a 2 call count; (created new UIS, deleted prior attachment to UisID 82697), ordrng 1 W11454734 (gearcase) and 1 W11239857 (belt) and 1 W10721967 (clutch)"
We serviced a
MAYTAG WASHER
Model MHW5500FW1
Near Leacock-Leola-Bareville, PA 17540
Justin L.
Job Details: 07/14/2022
cx complaint unit not completing cycle and showing f3e1. Was able to access unit and enter diagnostic and found f3e1 water level system error f6e3 communication error acu to ui f8e1 no water detected. Ran auto test and went through. Unit having pressure issue and will need control and pressure switch for repair. Once approved and in office will need to call in and set return.; ordrng 1 W11201286 (control)
We serviced a
WHIRLPOOL RANGE
Model WFE515S0JS
Near Leacock-Leola-Bareville, PA 17540
Justin L.
Job Details: 05/18/2022
cx complaint unit not working properly. was able to access unit and check voltage at the termianl block found constantly fluctuating voltage at l1 to ground and l2 to ground. videoed the spikes and showed the cx. cx will need an electrician to correct the issue as of now no further work needed