"Installed new control, harness , slider , clutch and stator . Ran diag test, now completing cycle .. Job complete"

"After unit was repaired last visit the unit worked for one cycle.. today found f6e3, f7e3 and f7e7 error .. unit will not agitate or spin.. ohmed motor out between pins , reading 10 -10.5ohms .. white wire and orange wire for shifter at control to shifter reading continuity .. control sending 120vac .. the clutch trys to engage and stator just hums .. not movement .. reordering control, motor and clutches.. also ordering main harness ..; ordrng 1 W11195971 (stator) and 1 W10754448 (clutch) and 1 W10734521 (slider) and 1 W11568984 (harness) and 1 W11621180 (control) and 1 2ct (2ct)"

Replaced Control. Stator. Clutch unit calibrated and tested unit is working properly.

"F6E3 AND F7E7 ERROR .. unit would lock, fill and drain , but no wash or spin. stator motor just humming . tried new slider but samething.. unit needs stator, clucth and control; ordrng 1 W11195971 (stator) and 1 W10754448 (clutch) and 1 W11621180 (control) and 1 2ct (2ct)"

CX Complaint is the unit isnt making ICE. Inspected unit and found unit not making ice found IM connector suppling power had come loose fixed and tested unit is now working properly.