Appliance Repair Hughesville Maryland

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Hughesville, MD 20637
Robert A.
Job Details: 07/11/2022
"Cx complaint that the unit's lid will not unlock. I inspected the unit and confirmed the complaint. I found error codes: f2e1 f5e3 f5e2 f5e1. I cleared the codes and attempted a manual test with the lid lock. It did not activate at all. I replaced the lid lock with one from VS because the pre id lid lock was not in my bin. I tested the unit for the cx. The unit is working as designed.; ordrng 1 W11307244 (latch), used 1 W11307244 (latch) from stock"
We serviced a
MAYTAG WASHER
Model MVWC465HW3
Near Hughesville, MD 20637
Shawn D.
Job Details: 07/05/2022
cx complaint unti is making a weird noise and cycles not working right. inspected unit then checked for erros and had 7e6. checked under unit ad found acuator popped out. went to van grabbed new acuator due to service pointer and new motor due to error code and replaced both then ran service cycle and unit now is working and sounds good. calibrated control unit is good
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Hughesville, MD 20637
Robert A.
Job Details: 06/01/2022
I installed the ordered part and tested the unit for the cx. The unit is working as designed.
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Hughesville, MD 20637
Shawn D.
Job Details: 05/26/2022
cx complaint unit vibrates bad and walks around when washing and also soap stays on clothes. inspected unit then checked for errors and had f2e1. unit does wiggle some so adjusted best i could. i then ran serivce cycle and everything is working good. cx then had me run drain and spin and said when spinning with no clothes its moving to much. i informed cx thats howthis unit works and vibrating pads can help. cx wants a different unit called techline documented cx complaint scott 7733746110