CX complaint is WM wont advance cycles. Inspected/tested and unit works in diagnostic cyles as well as indiviual testing. Based off CX complaint Im ordering control and lid lock. bot parts in stock. Spoke to CE. Scheduled CX for this Friday 5/12. AM APPT; ordrng 1 W11608056 (control) and 1 W11307244 (latch)

replaced compressor per prior diagnosis. Pressure tested with nitrogen. Vac'd down to 30in. Filled with 46g of R600a. Final low side pressure was 4in vac. Informed CX 24-36hrs for unit to reach temps. Unit is outside so this will effect temps. Also need to order drip tray. Cracked while trying to get it off old compressor. Cannot reschedule due to part availabilty; ordrng 1 W11559685 (tray)

Cx complaint is oven not heating properly. Tested inspected and verifed complaint. Replaced bake element from previous diagnosis and unit is now working as designed. Collected 110.00 labor by CC. Job is complete.

Cx complaint is unit not starting. Tested inspected and verifed complaint. Found the plug on the latch to not be seated properly. Corrected connector on latch and unit is now working as designed. Job is complete.

"Cx complaint is unit not making ice. Tested inspected and verifed complaint. Found the wires at the bottom of the door to be defective. Ordering FC door, cannot reschedule at this time.; ordrng 1 LW10726007 (dor-fip) and 1 WP4373559 (fitting)"