cx complained unit rc wasnt cooloing .confirmed cx complaint after inspecting unit. installed new fan motor assembly. unit now working a should

"cx complaint not turning on, found 0v at terminal, found breaker half tripped, reset breaker lever seems weak, found proper 116/117/241at terminal, door switch in tact, found open thermal fuse, replaced fuse , tested all ops ok"

"replaced lid latch. tested unit. lid is locking now but noticed unit didnt shift to agitate, whole basket moved instead of just agitator. found splutch failed. replaced splutch from v/s. tested unit. unit is now working properly; ordrng 1 W10721967 (splutch AD v/s) , used 1 W10721967 (splutch AD v/s) from stock"

cx complaint unit not draining. inspected unit and verified complaint. can hear drain pump running but no water coming out. found hair clip caught in drain pump. removed obstruction. ran calibration and autotest. water is pumping out good now. unit is now working properly

"CX complaint: Unit not cooling RC well.Inspected unit, instantly confirmed fan wasnt running. pulled evap and confirmed frost pattern but had to tap the fan blade to get it to run. confirmed constant voltage. fan keeps stopping Unit needs new fan motor.; ordrng 1 W11608966 (fan motor assembly)"