Installed the Sump Motor. Tested the unit. No leaks. Unit is working as Designed.

Cx complained the unit did not wash. Inspected the unit and found that there is a motor failure error of 4.3. The unit fills and drains. Made sure the motor was connected and recieved power but does not activate. Unit needs new sump assy; ordrng 1 W11613479 (sump)

"Cx complained the unit had long dry times. Inspected the unit and found it heats and spins, but does not move air. Unit needs duct cleaning company. Install and instruct. Job complete"

"Cx complained that after multiple back to back usage, the unit would no longer heat until cooled down. Inspected the unit and found no error codes and good air flow outside. Explained all to tech support and they say that the cx is just letting the motor get too hot and it is normal use. Job Complete"

Inspected the unit. Found that the cx is saying that the Refrigerator is leaking water. Checked the Dual Water Valve. Valve is leaking Water at the main Water Inlet Valve where the water is coming into the unit. Installed new Water Valve. Tested the unit. ( Cx must remove the 2nd Water Filter. It's causing too much pressure for the Dual Water Valve. Any questions please check Sd Pictures.) Unit is working as Designed.