Per previous diag I was able to access and replace the belt and splutch. I then tested the unit and found that it is now functioning as intended. Job complete

Per previous diag I was able to access and replace the belt and splutch. I then tested the unit and found that it is now functioning as intended. Job complete

Per previous diag I was able to access and replace the capacitor. I then tested the unit and found that it is now functioning as intended. Job complete

Cx complaint is that the unit is making a grinding noise when going from agitate into spin. Upon arrival I found that the unit has no error codes. I ran the unit and found that the belt is slipping on the splutch. I am ordering the splutch and belt. Please contact cx whenthe parts are available to schedule the return visit.; ordrng 1 WPW10006384 (Belt) and 1 W10721967 (Splutch)

Cx complaint is tha the unit is going from sense to done and not starting cycles. Upon arrival I found an F7E5. I then ran the diag test and found that the unit filled and drained and then when attempting to agitate and spin the motor was humming and not moving. I found that the capacitor has failed. I am ordering a capacitor. Please contact cx when the part is avaiable to scxhedule the return visit.; ordrng 1 W11395618 (Capacitor)