Appliance Repair Elizabethtown Pennsylvania

VIA INC Rated 5.0 out of 5 stars based on 1 customer reviews

We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Elizabethtown, PA 17022
Fred G.
Job Details: 10/21/2022
"issue resolved on its own, cx no longer requires service."
We serviced a
MAYTAG DRYER
Model MGDZ600TW2
Near Elizabethtown, PA 17022
Fred G.
Job Details: 10/19/2022
i was able to access unit and replace the gas burner and lint screen as per previous visit. tested unit and found it heats and checks good.
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Elizabethtown, PA 17022
Justin L.
Job Details: 07/18/2022
"Cx complaint after last repair unit still experiencing issues. Was able to access unit and found light on but no fans or compressor running. Ran test 56 no error codes E0 and checked deli ui and deli harness and checked good attempted test 3 and no fans ran. Test 4 nothing. Reset power to the unit and the compressor and fans started working. Ran 57 good and 45 valve activated no water came through line not frozen. Test 3 and 36 fans worked. Contacted techline and spoke to Rich SR#7734017181. He had me unplug deli ui and said that after a couple days if unit corrects itself it will need deli harness, deli ui, deli drawer, led power board, dual valve, and drip pan. If unit is still having issues after a couple days then unit is nonrepairable. Cx will reach out and inform; ordrng 1 W10804160 (led power board) and 1 WPW10341329 (dual valve) and 1 W11457241 (drip pan) and 1 WPW10769076 (pantry ui) and 1 W10815669 (deli drawer stainless) and 1 W11170612 (deli harness)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRB322DMBM01
Near Elizabethtown, PA 17022
Justin L.
Job Details: 07/18/2022
Cx stated that the unit had been working fine the last 2 days and attempted to cancel but unable to get through and canceled at door. If unit stops working again cx will reach back out but as of now no further work needed
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Elizabethtown, PA 17022
Justin L.
Job Details: 07/13/2022
Cx complaint unit banging around during cycle. Was able to access unit and found one of the legs had come out causing unit to be unlevel and bang. Corrected the issue and recalibrated then tested. Unit now operates as designed no further work needed
agedog71
Elizabethtown, Pennsylvania
07/27/2022
Justin was great. He was polite and knew a lot about the product. he worked for quite some time talking to the manufacture to try and fix the issue, then he explained in detail what the next steps were. Very happy with my experience.
Overall Experience