replaced sump from previous diagnosis and unit is now working as designed. Job is complete.

replaced sump from previous diagnosis and unit is now working as designed. Job is complete.

"Replaced Consolke and control per prior techs diagnosis. Unit powered on. Synched both together. During further testing I found that the splutch and belt were defective. Spoke to HM. Returning drain pump. Installed splutch and belt from VS. Calibrated and retested unit after reapir and it is now working properly. Job is complete; ordrng 1 W11239857 (belt FRVS), used 1 W10721967 (splutch FRVS), and 1 W11239857 (belt FRVS) from stock"

"Replaced Consolke and control per prior techs diagnosis. Unit powered on. Synched both together. During further testing I found that the splutch and belt were defective. Spoke to HM. Returning drain pump. Installed splutch and belt from VS. Calibrated and retested unit after reapir and it is now working properly. Job is complete; ordrng 1 W11239857 (belt FRVS), used 1 W10721967 (splutch FRVS), and 1 W11239857 (belt FRVS) from stock"

CX complaint is dryer no heat. Inspected/tested unit and found L1 to G was 121vac. L1 to L2 was 1.663v.Disconnected L2 and checked to chassiis ground and got 26vac. Outlet is inaccessible. Informed CX that she had an issue with her wiring or outlet.and she needs to call an electrician. CX also stated timer didnt work so ordering timer and returning with pre-id parts once cx has her electrical issue fixed.; ordrng 1 W10857612 (timer) and 1 look (look)