Appliance Repair Crownsville Maryland

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL WASHER
Model WTW5100HW2
Near Crownsville, MD 21032
Shane B.
Job Details: 07/21/2022
installed ordered part and tested unit for cx. unit is working as designed.
We serviced a
WHIRLPOOL WASHER
Model WTW5100HW2
Near Crownsville, MD 21032
Emmanuel R.
Job Details: 07/19/2022
"Cx washer fills and drain but never washes. Found error code F7E1 tachometer not present. Ran test cycle unit fills drains, but motor humms at spin and agitate, Acuator shifting ok. Pulled unit out and found oil on the floor, inspected futher and found gearcase is ok, the oil is coming from the capacitor. Capacitor has a pin hole near the bracket and all the oil leaked out. Ordering capacitor.; ordrng 1 W11395618 (capacitor)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHW4
Near Crownsville, MD 21032
Kevin P.
Job Details: 07/07/2022
"installed new control and sump assembly, new sump is equipped with a diverter which the original did not have and i had to remove the diverter disc for it to work properly. job complete"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHW4
Near Crownsville, MD 21032
Eric W.
Job Details: 07/01/2022
cx complant of unit not washing inspected unit founn it will fill with water buty no pump unit will need new control and sump; ordrng 1 W11025157 (sump) and 1 W11087226 (control)
We serviced a
JENN-AIR MICROWAVE
Model JMW2430IM03
Near Crownsville, MD 21032
Andrew H.
Job Details: 06/23/2022
Customers complaint is the unit has F1 E4 error code. I replaced appliance manager for a previous service visit. I powered unit on and tested. unit worked for the first couple times without any issues third and fourth try F1 E4 error code came back up inspected unit found for microwave 4903 relay power issue I noticed as soon as I opened up the micro wave door the error code presented itself. I found door switches in line with 4903 relay from l1. Unit is detecting interference or poor connection in door switch. Unit will need new door switches but have to order harness to obtain door switch assembly. Door switches should be the only part that needs to be replaced. Primary door switch is the issue that's in line with 4903 relay on appliance manager board. I called the office and spoke with katie. Katie rescheduled customer for 6/28; ordrng 1 W11449277 (Harness)