replaced lid and unit is now good

cx compalint unit will not lock to start cycle.inspected unit and found lid to have splintered at the bottom left corner.causing unit hinge to pop out and not close properly.need new lid. W11259006; ordrng 1 W11259006 (lid)

cx complaint unbalanced. arrived put unit into a service diag. got error code f0e5 for unbalanced load. pusheed on tub bounce like 3 times. installed suspension doesnt bounce as many time clear error code. ran a calibration cycles and Service Diagnostics verification cycle. no error codes after repair. repair is now complete.

installed levelijg feet and leveled unit.tested unit on spin and all good.

x complaint unit does not fisnish a load.inspected unit and found unit to be very unblanaced.tried adjusted feet but found three of the 4 feets to be warped and not letting me adjust them to certasin point so i can properly balanced unit.unit needs 4 leverling feet.WPW10687506; ordrng 4 WPW10687506 (leveling feet)s