Appliance Repair Camden North Carolina

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ08
Near Camden, NC 27921
Austin D.
Job Details: 07/13/2022
"cx complaint the unit is not cooling correvtly. checked the unit and found that the unit is not defrosting. checked heater, harness, control, etc. heater does come on manually. control is not sending votlage automatically during the defrost cycle. the sensors are all reading correctly. called techline to document and was told to replace the control. part on order. part on fbo. cx is upset. refeered cx to cx service.; ordrng 1 W11546690 (control)"
We serviced a
MAYTAG DRYER
Model MEDB835DW4
Near Camden, NC 27921
Austin D.
Job Details: 06/23/2022
"cx compalint the unit is not turing on or drying. checked the unit and found that the thermal fuse was open. repalced and tested the unit. advised cx to have the vents cleaned out for better performance.; ordrng 1 wp3392519 (thermal fuse), used 1 wp3392519 (thermal fuse) from stock"
We serviced a
KITCHENAID DISHWASHER
Model KDFE204KPS0
Near Camden, NC 27921
Branden R.
Job Details: 06/14/2022
"came out for heating element - sp w11540964 - special project s17304 - pre-id heater bushing w11537778�- . . . checked unit and disassmbled replaced heating element and tested unit is running as designed with no leaks , reinstalled and tested again unit is running as designed."
We serviced a
KITCHENAID DISHWASHER
Model KDFE204KPS0
Near Camden, NC 27921
Branden R.
Job Details: 06/14/2022
"came out for heating element - sp w11540964 - special project s17304 - pre-id heater bushing w11537778�- . . . checked unit and disassmbled replaced heating element and tested unit is running as designed with no leaks , reinstalled and tested again unit is running as designed."
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Camden, NC 27921
Branden R.
Job Details: 06/13/2022
"cx complaint unit not washing clothes , checked unit found bad actuator on unit not allowing unit to changed from spin to actuate . replaced with new actuator and tested unit is now running as designed . cx agreed ."