Appliance Repair Burke Virginia

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Burke, VA 22015
Robert W.
Job Details: 07/21/2022
CX Complaint is the unit isnt spinning. Inspected uhnit and found no error codes ran diag and unit is running properly no issues. Did tighten up washplate because it was loose. Unit is working properly.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Burke, VA 22015
Robert W.
Job Details: 07/21/2022
CX Complaint is the DW door not closing. Inspected unit and found the door gasket not sitting in place reseatted and tested unit unit is now working properly.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ02
Near Burke, VA 22015
Richard B.
Job Details: 07/20/2022
"CX complant. Water leaking after repair. Inspected unit and found dual valve leaking large amounts of water into fridge . Found valve is leaking from one of the plastic weld areas . CX also stated after valve replacement that freezer drawer wont open, Released leveling feet and water poured out from deli drawer Removed excess water and freezer is frozen closed , Want to replace both left and right rails in freezer compartment . CX will moniter area with towels and replace wet towels until drawer opens and closes. Referigerartor is turned off currently . Towels are down to catch water .Further work needed, One rail not in stock. RB; ordrng 1 W10625067 (left rail) and 1 W10625068 (right rail) and 1 rivetgun (rivet gun)"
We serviced a
AMANA REFRIGERATOR
Model ASI2175GRS08
Near Burke, VA 22015
Richard B.
Job Details: 07/19/2022
"CX complant. Freezer iced over and no ice Inspected unit and found ice build up on evap cover. And fan not running. Ordering fan motor , harness and main control board. RB; ordrng 1 W11546681 (harness) and 1 WP2315549 (fan motor) and 1 W11546609 (control)"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADW9
Near Burke, VA 22015
Richard B.
Job Details: 07/19/2022
"CX complant. Dishes not drying. Inspected unit and found CX is using normal setting without drying enabled. Advised CX which settings to use and to always use rinse aid, Machine washing good , Draining good and heating good. Job completed, RB"