Appliance Repair Bryans Road Maryland

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL DISHWASHER
Model WDT710PAHZ1
Near Bryans Road, MD 20616
Shane B.
Job Details: 05/05/2023
previous notes from tech says cx has a warrenty through 2027 but ticket shows no warrenty info. i called the office and they said they have no warrenty info and cx would have to pay out of pocket. i called the cx and explained this. she did not want to pay out of pocket when she already paid for a warrenty. gave her office phone number and she is going to call office and warrenty company to reschedule the appoitment.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT710PAHZ1
Near Bryans Road, MD 20616
Shane B.
Job Details: 05/05/2023
previous notes from tech says cx has a warrenty through 2027 but ticket shows no warrenty info. i called the office and they said they have no warrenty info and cx would have to pay out of pocket. i called the cx and explained this. she did not want to pay out of pocket when she already paid for a warrenty. gave her office phone number and she is going to call office and warrenty company to reschedule the appoitment.
We serviced a
WHIRLPOOL RANGE
Model WFE524CLBS0
Near Bryans Road, MD 20616
Leon
Job Details: 05/02/2023
cx complaint is the unit was smoking confirmed issue cut unit on seen smoke coming from the broil element cx refused repair said she would buy a new unit
We serviced a
WHIRLPOOL OVEN
Model WFG515S0JS0
Near Bryans Road, MD 20616
David J.
Job Details: 05/01/2023
Cx complaint bake igniter would not start unit. Arrived today and removed bottom pan. Removed spreader and igniter. Replaced both parts. Tested unit and unit ignited. Unit is now working as intended. Job complete
We serviced a
WHIRLPOOL RANGE
Model WFG320M0BS3
Near Bryans Road, MD 20616
David J.
Job Details: 04/18/2023
"CX complaint unit sometimes does not heat arrived today and inspected unit and could not verify complaint. Remove bottom pan to inspect igniter and found when bake is started glow igniter, lights and starts flame. Unit proceeded to get to 350 degrees. Opened door and unit turned back on and got back to 350. Attempted broil cycle and worked the same. Could not get unit to fail. Re installed all parts and tested again and unit worked as intended. Unit is working as intended. Job complete"