BRAND NEW HOME UNOCCUPIEDGOT HERE inspected unit & found medium speed not working for blower issue with ui need part; ordrng 1 WPW10716813 (cntrl-elec ui)

"cx complaint unit leaked from under neath, found leaking at clamp to pump not fully seated and dripping on floor, resecured all clamps, ran daignostics, could hear drain pipe backing up and after 2nd drain water also backed out stand pipe, cx will contact plumber to have drain snaked out, tested all ops ok"

"installed new blower and control, still nt geting voltage to blower, while lower fan works fine, f5-4, f5-5 have 120v off lower control but not off upper even after replacing board, can check resistance thru lower but cant for upper, harness issue, called techline. ordering main harness , signal harness, main control, 2 tech 2 count; ordrng 1 W11245674 (harness main) and 1 W11256625 (harness signal) and 1 W10562910 (harns-wire EOL) and 1 W11448962 (control)"

"cx complaint f8e0 on first use, confirmed error stored, found upper cooling fan not running at all, could just be unplugged , could not get unit on cart due limited space and location of cable thru cabinet (see pic), called office and rescheduled 2 tech job for weds 8/23;"

installed ignitor and tested unit with lower panel removed to observe gas flow. found unit received gas and ignited as intended. unit now checks good. cx pif per sticky