"cx complaint unit not heating properly, checked unit found no error codes, themp sensor in range 1064 ohms at 64 degrees, found broil element open @ p5 on control, bw wire unseated from element, reseated, broil at 16 ohms, bake at 24 ohms, 244 vac to unit ran calibration cycle 374296 354 310 358 312 av 334 - adjusted the temp up 20* - unit working as designed - advised CX calling back several times will not get the unit exchanged and will be charged"

"cx complaint unit not heating properly, checked unit found no error codes, themp sensor in range 1064 ohms at 64 degrees, found broil element open @ p5 on control, bw wire unseated from element, reseated, broil at 16 ohms, bake at 24 ohms, 244 vac to unit ran calibration cycle 374296 354 310 358 312 av 334 - adjusted the temp up 20* - unit working as designed - advised CX calling back several times will not get the unit exchanged and will be charged"

"cx complaint unit not heating properly, checked unit found no error codes, themp sensor in range 1064 ohms at 64 degrees, found broil element open @ p5 on control, bw wire unseated from element, reseated, broil at 16 ohms, bake at 24 ohms, 244 vac to unit ran calibration cycle 374296 354 310 358 312 av 334 - adjusted the temp up 20* - unit working as designed - advised CX calling back several times will not get the unit exchanged and will be charged"

"cx complaint unit not heating properly, checked unit found no error codes, themp sensor in range 1064 ohms at 64 degrees, found broil element open @ p5 on control, bw wire unseated from element, reseated, broil at 16 ohms, bake at 24 ohms, 244 vac to unit ran calibration cycle 374296 354 310 358 312 av 334 - adjusted the temp up 20* - unit working as designed - advised CX calling back several times will not get the unit exchanged and will be charged"

"cx complaint unit not heating properly, checked unit found no error codes, themp sensor in range 1064 ohms at 64 degrees, found broil element open @ p5 on control, bw wire unseated from element, reseated, broil at 16 ohms, bake at 24 ohms, 244 vac to unit ran calibration cycle 374296 354 310 358 312 av 334 - adjusted the temp up 20* - unit working as designed - advised CX calling back several times will not get the unit exchanged and will be charged"