CX complaint the unit is too cold after my last visit. I have found this unit needed to have a data logger. That way we can track whats going on. I arrived today and temperatures were set at 38° in the refrigerator and 0° in the freezer tested temperatures and had 35° in the refrigerator and -4° in the freezer. will send data logger back to office to have it looked at and will call Whirlpool once the data is looked at. Customer stated everything seems to be working good since parts were installed last visit and unit is now making ice.; ordrng 1 Look (Look)

"I came to install the parts. The IM and temps are working fine now. The ice bin is full of ice and the RC temp is 38degrees (set to 39). I installed the mullion and vent panel, as well as placing the datalogger in the RC. We will need to return to retrieve the datalogger. She is not free next friday (2/10), I set the appt for 2/13.; schdld next appmnt for 2/13 MON !"

"arrived temps were 7 in freezer 33 pulled unit out checked heat transfer dryer is cold so took frreezer apart unit has full frost pattern some ice build up on right hand side not around thermister then damper opened closed a couple times and is noisey. unit is still on and cooling so checked dryer again and now is warm condenser is hot. replaced control , ui and damper plugged back in and unit started to cool. told cx keep an eye on tmeps over the weekend and to call back monday if still issue"

"arrived temps were 7 in freezer 33 pulled unit out checked heat transfer dryer is cold so took frreezer apart unit has full frost pattern some ice build up on right hand side not around thermister then damper opened closed a couple times and is noisey. unit is still on and cooling so checked dryer again and now is warm condenser is hot. replaced control , ui and damper plugged back in and unit started to cool. told cx keep an eye on tmeps over the weekend and to call back monday if still issue"

"arrived temps were 7 in freezer 33 pulled unit out checked heat transfer dryer is cold so took frreezer apart unit has full frost pattern some ice build up on right hand side not around thermister then damper opened closed a couple times and is noisey. unit is still on and cooling so checked dryer again and now is warm condenser is hot. replaced control , ui and damper plugged back in and unit started to cool. told cx keep an eye on tmeps over the weekend and to call back monday if still issue"