when arrived hooked guages and foudn the low side readin aroudn 0 and on the high side had very high psi reading 430 psi on the high.. called techline and spoke to Chris and was advised to cut out the drier and if no pressure /via vaccuum is in normal ramge then possible evap but the unit didnt need evap with those readings per techline. replaced drier and compressor and filled to required r600.

went to replace the following parts and when putting the new compressor on the unit suction line was trying to swedge in to size.. the pipe from the compressor had bent almost in half and is to kinked folded at the crease.. will need new comnpressor along with the schded prdered couplings.; ordrng 1 w11580057 (compressor) and 1 W11504415 (coupler) and 1 W11504430 (high pres side to compressor coupler) and 1 W11506619 (coupler) and 1 W11504447 (cap to dryer coupler) and 1 W11504445 (suction line to condensor) and 1 W11504432 (coupler) and 1 3count (3 coutn) and 1 sstecha (ss tech)