not completing cycles stopping at drain and spin but will run drain and spin if cycle is set to drain and spin found error stored and replaced valves and test unit normal flow.

"washer/dryer combo stopping mid cycle has to turn to drain and spin to get rid of water enter diag ran diag cycle and checked for errors sense,wash /done long fill error tested cold small stream going into tub removed cold water line from inlet debris in filter attempted to remove no change on flow sugguesting inlet valves customer will call in with cc payment 282.93; ordrng 1 W11222849 (inet valves)"

concerns with water coming into tub tested noise from cold valve no water entering removed cold water line cleaned screen checked voltage 120 vac to valve replaced using van stock caloibrated and ran diag normal flow; ordrng 1 w11038689 (valve jd vis)

per notes replaced sump tested no leaks wash motor now moving water

unit wont run has poweer to sump but wont run ordering part; ordrng 1 W11025157 (pump&motor)