checked parts this morning and noticed box was opened before but on bottom and part was damaged and dented and part will need to be reordered. called cx and left a detailed voicemail that part was damaged and will are ordering him a new one and will get him back on schedule assoon as we can. took pictures of box and part as well.; ordrng 1 W11083804 (Blower Re Order)

replaced the dispenser and the bellow and ran the diagnostic. the unit is filling draining and spinning good. no leaks after. the unit is now good

cx says the blower is not working but the cooktop does. black-white is 106vac and 32ohmsblue-white 106vac and 43ohmsred-white 106vac and 54ohmsunit is recieving 120/240/120vac.both slightly off from what techsheet shows. unit needs the blower and switch.; ordrng 1 W11083804 (blower) and 1 W11690658 (switch)

cx complaint is unit ran good and one day floor was soaked in the front. tested and checked unit. no codes found. had to test and run cycle. found 2 slight drips or water traces. will order parts needed as well as rescheduled for 11/27; ordrng 1 W11314648 (Bellow) and 1 W11524105 (Dispenser)

"Cx complains about a rattling noise, inspected unit, the noise comes from the damper motor, conneciton cks ok, damper sound too loud, repalced part, reset power, unti tested ok"