"cx complaint of unit stops cooling after about 2 weeks of run time and has to unplug to defrost. checked unit and found brown wire to heater not seated into connector causing heater failure. properly seated pin into connector, tested heater, confirmed heater operation, unit is working as designed."

"cx complaint of unit not freezing items. checked unit and unit temp is 42 degrees. Pulled unit and found suction line frozen to comrpessor. checked evap and is covered in ice. thermistor reading 8.2k and is covered in ice and should be closer to 23k. Activated heater to verify heater funcion. heater is working. Removed and replaced thermistor, unit is working as designed.; ordrng 1 W10383615 (thermistor,fc), used 1 w10383615 (thermistor) from stock"

"cx complaint of unit not cooling. checked unit and found evap frosted over. checked defrost thermistor and found it to be reading 1.7kohms covered in ice and is not good. verified heater function. removed and re placed thermistor, unit is working as designed."

recovered remaining refrigerant from unit. noiticed oil mixed in. removed and repalced evap and filter/dryer. during this more oil and dye came out of both and on evap was in suction line. pulled 30ng of vac and began charging. during this pressures rose above 15 psi on low side and almost 200 psi at only 3 oz in. stopped chargin and began long vac on unit and called techline. s/r 7733936741 cx was concerned about paying full price of 350 on labor as unit is unrepairable at this point. dropped labor to 250 cx paid in cash.

"cx complaint of unit not cooliong 6 months after previous repair. checked unit and found leak at evap and thermistor heavily corroded. unit need evap and thermistor quoted cx 120 service call, 350 labor, 15 shipping, 11.48 in tax, 101.27 evap, 43.66 thermistor, 19.10 dryer, 660.51 in total. cx paid 310.57 today and owes 350 for labor upon return.; ordrng 1 W11507067 (evap) and 1 WPW10143759 (dryer)"