"Client complaint was the unit didn't cut on confirm the is you seeing that the unit wasn't getting any power cycle. The circle breaker. Everything cut on it worked, but when I moved the unit. A big spark happened, and I had to figure out where the spark was coming from. Seen the spark was coming from the oven Thermister. The black wire is Disconnectedand was touching metal. Ordering new oven thermister and main wire harness.; ordrng 1 WPW10641988 (Thermostat Kit) and 1 6610437 (Main harness)"

arrived to freeezer at 12 degrees full frost pattern big ice build up from defrost problem cuasing temp swing. cleared all ice then replaced the rails and ice maker then put back together plugged in and ice maker filled with water unit started cooling. unit is good to go

installed fan and restored power. fan is running. unit is working as designed.

"cx complaint is the RC section not cooling. confirmed complaint. unit is set to coldest settings in both sections. prob shows 63 in RC, -2 in FC. ice maker is still making ice. found damper door to be open but i dont feel any air flow. inspected evap and found fan is not running. fan is gettig 122vac. fan shows 17m ohms. out of spec. unit needs new evap fan. cx paid in full for repair. scheduled return with office for 11/13.; ordrng 1 W11024089 (motor-evap)"

installed gasket. the gasket slipped off after getting glue on it and made a mess of the inner door. ordering inner door and new gasket for return visit. schedule when availalbe.; ordrng 1 W10861521 (seal-door) and 1 WPW10463967 (door) and 1 WP279368 (adhesive)