per notes replaced ui vent and lower door seal tested unit didnt leak and no errors

installed right front valve and called and confirmed with office valve was paid for tested now all burners is working

Inspected the unit. Found that the cx is saying that the Refrigerator isn't making Ice. I then checked the power to the Ice Maker. I'm getting 120.2 volts. Tried to jump the Ice Maker with button underneath being pressed. Ice Maker will not Harvest. Installed new Ice Maker. Tested the unit. Ice Maker Harvested & Filled. No leaks. Cx then pointes out that the Arm for crutched & cubes ice isn't moving to allow these options. I put grease on the shaft. Tested the Dispenser. Dispenser is now Dispensing Crushed Ice Cubed Ice. Unit is working as Designed.

"Installed the Control Board, Upper Harness & Lower Harness. Tested the unit. Unit is working as Designed."

Inspected the unit. Found that the cx is saying that the Dishwasher isn't cleaning. Ran Service Diagnostics on the unit. Error Codes are F4E3 = Sump Motor isn't running. Checked the harness connection to the Sump Motor. They are fully plugged into the Sump Motor. Unit will need the Sump Motor = W11025157. If the cx calls back order the Sump Motor. Don't go without parts. Cx paid for the Service Call Only by Card.