cx complaint unit is not filling with water. inspected unit then checked for errors and had f8e1 f6e3 so cleared codes and ran diag cycle and had no water flow so canceled cycle and checked water valves to see if on found hot falve leaking some from house supply and cold valve off. turned valve on and ran diag cycle again and this time unit filled with cold and hot water cycled completed. i started a quick wash cycle and unit seems good to go then opened door and noticed standing water in front of bellow gasket. found holes clogged with dog hair from prev owner and now is draining good. i then gave cx qiote for new gasket incase wants in replaced. collected fo service fee; ordrng 1 W11106747 (bellow 196.60)

`cx complaint washer doesnt turn on. arrived installed control. tested unit is now working as desgined. repair complete.

unit has a power cord.power cord ordered is not needed.issue with unit is bad control as the one of the transistiors failed on the board.need control board W11189137 special order; ordrng 1 W11189137 (control)

"cx complaint unit is ripping clothing,leaving black spots on clothing and has a burning like smell at times. inspected unit and noticed tub has a gap in the back like roller is broken. took unit apart and found rear right roller broken and clothes have been resting on heater cuasing the smell. unit needs 2 rear rollers and was pre id 2. grabbed pre id parts and instgalled then tested and unit sounds good and is working good. unit is good to go"

"cx complaint unit is not working.inspected uit and got error code f0e3,f0e5 and f7e9.foind no locked rotor.ran a quich wash with clothes and unit performed well.recalibrated unit.called techlien and described complint and my findings advised unti is working well."