"Replaced divider, auger motor and yolk per prior diagnosis. After repair I tested IM and it is now working and dispensing properly. Job is complete"

cx complaint is no cool. Replaced compressor and drier per prior diagnosis. Pressure tested unit with 140psi of nitrogen after repair and no leaks. ac'd down to 30in for 15mins. allowed pressures to equalize. Filled with 56g of R600a. All fans and compressor running. Informed CX 24-36 for unit to get to temps. Job is complete

Cx stated unit not filling inspected tested and verified cx complaint found harness defective break in harness for inlet valve ordering harness cannot reached due to SO part. ; ordrng 1 W11227372 (Harness)

Cx stated unit not filling inspected tested and verified cx complaint found harness defective break in harness for inlet valve ordering harness cannot reached due to SO part. ; ordrng 1 W11227372 (Harness)

Cx stated unit not filling inspected tested and verified cx complaint found harness defective break in harness for inlet valve ordering harness cannot reached due to SO part. ; ordrng 1 W11227372 (Harness)