"Per the previouse tech, I was able to access and replace the icemaker . I then ran test 56 , 57 , and 45. I fou d the unit to be opperating as designed. Unit test good."

replaaced parts and tested unit closes and checks good. icemaker filled.

I was able toaccess and replace the inlet valve. I tehn recalibrated and ran a auto test. I found the unit tobe opperating as designed. Unit test good.

"x complaint that unit is stilil leaking out the to bottom left ONLY side of the fron of the DW. when srrived found the unit to have still no wet inner padding and also no leaks from inlet valve hoses, sump, pump etc. new gasket was replaced and inserted correctly prior no signs of leaking from rail screws and or manfiold tubing inserted fully water spray normally not just at one direction.... did however fine the fan issues with mositure left within the unit days after being ran. and where the water is leaing from is the vent funnel to the left of the DW, and found no fan operation when tested and discolored inside the venrt from not running. ordering vent fan assmebly with o ring wpw10469574. cal lto reschd. when approved...; ordrng 1 WPW10469574 (vent fan) and 1 WPW10195032 (vent fan deflector)"

"I was able to access and replace the door lock. I then tested the unti and fou d that the unit would enter diag and then kick me out several times. I fou d all funtions of the control console are preseant , but opperation is intermitant. I am ordering 1 control board (W11583890). Return is set for 12/6; ordrng 1 W11583890 (control bord)"