"Cx Complaint is the unit isnt starting. Inspected unit and found the strike has failed and is keeping unit from starting, Replaced strike and tested unit unit is working properlhy."

"Cx complaint is, Not Operating or Won't Start - Has Power - Top Load Washer. Found unit unplugged, and looked underneath washer to see if drain pump wires was broken. Drain pump wires are intact. Removed cover to actuator and splutch, both are connected. Fault error code is f1E1 main ACU NEEDED. FOUND that the unit may not be on its own circuit breaker. Asked that the washer to be checked and put on its own circuit breaker. Ordering main ACUW11556725, fasciaW11561182,, controlW11481116; ordrng 1 W11556725 (ACU) and 1 W11561182 (Fascia) and 1 W11481116 (Control)"

"Cx complaint is, Not Operating or Won't Start - Has Power - Top Load Washer. Found unit unplugged, and looked underneath washer to see if drain pump wires was broken. Drain pump wires are intact. Removed cover to actuator and splutch, both are connected. Fault error code is f1E1 main ACU NEEDED. FOUND that the unit may not be on its own circuit breaker. Asked that the washer to be checked and put on its own circuit breaker. Ordering main ACUW11556725, fasciaW11561182,, controlW11481116; ordrng 1 W11556725 (ACU) and 1 W11561182 (Fascia) and 1 W11481116 (Control)"

"Cx complaint is, Not Operating or Won't Start - Has Power - Top Load Washer. Found unit unplugged, and looked underneath washer to see if drain pump wires was broken. Drain pump wires are intact. Removed cover to actuator and splutch, both are connected. Fault error code is f1E1 main ACU NEEDED. FOUND that the unit may not be on its own circuit breaker. Asked that the washer to be checked and put on its own circuit breaker. Ordering main ACUW11556725, fasciaW11561182,, controlW11481116; ordrng 1 W11556725 (ACU) and 1 W11561182 (Fascia) and 1 W11481116 (Control)"

"Cx complaint is, Not Operating or Won't Start - Has Power - Top Load Washer. Found unit unplugged, and looked underneath washer to see if drain pump wires was broken. Drain pump wires are intact. Removed cover to actuator and splutch, both are connected. Fault error code is f1E1 main ACU NEEDED. FOUND that the unit may not be on its own circuit breaker. Asked that the washer to be checked and put on its own circuit breaker. Ordering main ACUW11556725, fasciaW11561182,, controlW11481116; ordrng 1 W11556725 (ACU) and 1 W11561182 (Fascia) and 1 W11481116 (Control)"