"Cx complains that the spin cycle not working, wet clothes at the end of the cycle, inspected unit on test mode, no error codes .. test mode works fine. unit draining ok.. high spin speed cks ok.. faulty cntrl board.. unti get stuck between rinse and final spin. order part; ordrng 1 w11550649 (cntrl elec)"

"Cx complains that the unit stopped making ice or dispensing water, inspected unit, filter cks ok, good water pressure from supply hose. no water on filter housing, problem with water inlet valve. order parts; ordrng 1 w11512399 (valve inlet) and 1 WPW10341320 (valve-inlt)"

the unit still doesnt have any signs of the evaporators leaking. replaced the evaporators and vaccuummed down the system. ran test 4 and step 4 the refrigerator evaporator does get mostly frosted over. step 5 the frreezer evaporator gets mostly frosted over. called tech support and spoke with a bruce. says the unit shouldnt get a full frost pattern since r600 in test mode. the unit is now good

"Replaced parts, unit tested and washer machine works fine"

replaced the outer panel the insert and the inner door. ran the diagnostic and the unit is now filling washing and draining good. the unit is now good