Confirmed cx complaint unit making grinding noise. Found oil beneath unit. Gearcase leaking oil. Ordering gearcase.; ordrng 1 W11449841 (gearcase)

"Freezer temp 29 degrees. Fridge temp 33.6 degrees Fridge set at 40 degrees, freezer at 4 degrees. Unit over cooling fridge and under cooling freezer. Unit components work properly in test mode but after test mode unit failed to start compressor until third attempt, first two attempts the relay clicked on then back off after a moment. Ordering start relay and capacitor and boards in the event there is a dc voltage feedback issue.; rqstng P&A on 1 WPW10356039 (cntrl-elec), ordrng 1 WPW10235488 (cntrl-elec) and 1 WPW10260370 (start-dev) and 1 WPW10662129 (capacitor) and 1 WP218887 (condenser fan motor)"

installed parts checksok

i found fsn not running and no volts to fan checked at control p9 and 12. 7 dc volts but was going up and down after unpowering and calling tech line to recheck fan started to run during diag cx would liek to ty to see if fan keeps running if called back will need fan harness and control

"Confirmed cx complaint unit not advancing cycles. Found inlet valve not actuating properly, unit not getting enough water for final rinse and spin. Replaced valve with truck stock, tested unit, unit working as designed.; ordrng 1 W11210463 (valve EF TS), used 1 W11210463 (VALVE) from stock"