arrived ran nitrogen through and no drops again and ran vac pump for 25 mins then fileld scaled r600.. inserted data logger and schd for return week out to record temps.; schdld next appmnt for 12/6 WED !

"Cx complaijnt unit won't start after sensing. Entered diag and found no error codes. Ran test cycke and unit completed test without any issues. Cx stated unit wouldn't add water. Instructed and informed cx on how unit operates in regards to load size, balance and leveling and having even amount of clothes distibuted around basket. Cx understood and will record if unit doesn't function properly. No parts needed, unit runs as designed"

"Cx complaint is that the unit is not getting up to the proper temps and not all the burners are working right. Upon arrival I found that the unit has no errors, I preheated the oven and then found that the unit is averaging 348.4 degrees. I also inspected the burners and found that they needed adjusted. I also found that the center burner had debris in it preventing it from ignting completely. I found that the unit is functioning as intended. job complete."

"cx complaint that unit is not cooling correctly.. found fans and all running but appearnt SS repair still needed with the rc section inside range of 40 and 13 in fc section and not solid solid frost pattern, will need the nitogen flushing along with the temp data logger to flush niotrogen through being the pressures reading itoday were -14L and 52 -55 H.. cx is also afraid to load the rc section up being going bad.. i found ice was made in fc section and also frozen box of food.. will need niotrogen, TCHline call being time of flushing and holding and also data logger on return; ordrng 1 nitorgen (nitro) and 1 data (datalogg) and 1 sstch (ss tch) and 1 2count (2 count)"

arrived found the unit to have leak actually resealed the drier leak and pulled vsac 29 in and ran notrogen through and filled 47g in the unit allow time to cool