"found loose connection on control, reseated and tested . Job complete"

CX complaint FRIDGE no ice. Found icemaker harness not clipped in. Replaced icemaker used wiretire to secure. Level doors. Clean condenser & cover. Harvest & filled. FC LED is out > JJ; ordrng 1 W10884720 (icemaker harness) and 1 W11338583 (bulb FC) and 1 W11445850 (FC switch)

CX complaint WASHER stopped during wash cycle. CX waited a few minutes & started another cycle. CX has been using unit since. Checked voltage at outlet & the plug is secure & tight. Check = no error codes. Calibrate & ran test wash > JJ

Cx complained the unit did not make ice. Inspected the unit and found good water pressure at the dispenser but there was small ice in the fill cup. Removed ice and debris and tested and the ice maker cycled and filled with water for a harvest. Job complete

Cx complaint unit not working correctly. After previous techs visit he had found unit needed a new water valve. Arrived today and inspected and had very little water coming out. Cut water and removed valve. Replaced with inlet valve and tested unit. Unit now dispenses water properly. Unit now working as intended. Job complete