Appliance Repair Rocky Mount North Carolina

VIA INC Rated out of 5 stars based on customer reviews

We serviced a
WHIRLPOOL RANGE
Model WFE515S0JS0
Near Rocky Mount, NC 27804
Ronnie B.
Job Details: 07/19/2022
"removed and replaced infinity switches and element, tested, unit works as designed."
We serviced a
WHIRLPOOL FREEZER
Model WZF34X20DW02
Near Rocky Mount, NC 27803
Ronnie B.
Job Details: 07/19/2022
cx complaint of unit leaking water again. Checked unit and found suction tube frozen to compressor causing moisture to drip under unit. Checked unit and found defrost thermistor only reading 12 k ohms covered in ice. Removed and replaced defrost thermistor and activated heater to confirm function and heater is good. Unit is working as designed.
We serviced a
AMANA DRYER
Model NED4655EW1
Near Rocky Mount, NC 27803
Ronnie B.
Job Details: 07/15/2022
"cx complaint of unit will not shut off without opening door. Checked unit and found timer motor nut running with voltage present. removed and replaced timer, tested, unit is working as designed."
We serviced a
AMANA REFRIGERATOR
Model ASI2575GRW08
Near Rocky Mount, NC 27803
Ronnie B.
Job Details: 07/15/2022
"cx complaint of unit not cooling. Unit unplugged upon arrival. Plugged unit in and tested, compressor kicks on for about 2 mins and shuts off. During this time is pulling almost 4 amps. Unit is restricted. Tested heater and confirmed function, thermistor reading out of range. Evap fan shorted and control not sending voltage, fc led out with voltage present Ordering evap just in case restriction is stuck inside.; ordrng 1 W11546690 (control) and 1 W11580057 (compressor) and 1 W11504415 (lock ring) and 1 W11504431 (lock ring) and 1 W11506619 (lock ring) and 1 W11546692 (evap) and 1 W11504449 (lockring) and 1 W11506619 (lockring) and 1 W11520324 (led) and 1 nitrogen (MA) and 1 2325479 (coupler) and 1 W10805035 (drier-tube) and 1 W11504433 (lockring) and 1 W11504447 (lockring)"
We serviced a
WHIRLPOOL RANGE
Model WFE515S0JS0
Near Rocky Mount, NC 27804
Ronnie B.
Job Details: 06/24/2022
cx comlpaint of front burners not working until on high setting. checked unit and found switches not activating burners until atleast 1/4 turn and then cycle off quickly. unit needs both front infinity swithes. Also found break in front left element and needs replaced.; ordrng 1 WPW10434452 (switch-inf) and 1 WP3149400 (switch-inf) and 1 W11517959 (element fl)