Appliance Repair Rehoboth Beach Delaware

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL REFRIGERATOR
Model KRFF507HPS01
Near Rehoboth Beach, DE 19971
Michael E.
Job Details: 07/20/2022
"CX complaint: loose door handle. Tested and verified complaint. I tightened the door handle, tested unit and it is now working properly. Job is complete"
We serviced a
MAYTAG MICROWAVE
Model MVWP576KW0
Near Rehoboth Beach, DE 19971
Andrew W.
Job Details: 07/18/2022
Cx complaint is unit not advancing cycles. inspected and tested and verified complaint. put unit into test mode and checked for error codes. no error codes found. put unit into test cycle and unit shook pretty hard. leveled unit. found the water filling portion of the cycle was taking a long time to fill. found water valves were only halfway open. fully opened water valves and unit filled as designed. unit is working as designed. job oomplete
We serviced a
MAYTAG WASHER
Model MVW6230RHW0
Near Rehoboth Beach, DE 19971
Frederick R.
Job Details: 07/16/2022
CX complaint is WM making squealing noise. Inspected/tested and verified complaint. Found unit had a stretched out defective belt. Replaced belt from pre-id. tested unit is high spin and it is now working properly. Charged CX $261.28 for SC labor part and shipping. He paid in full by CC. Job is complete
We serviced a
KITCHENAID FREEZER
Model KFIS29BBMS00
Near Rehoboth Beach, DE 19971
Frederick R.
Job Details: 07/14/2022
CX complaint is FC and RC no cool. Verified complaint. FOund RC evap leaking uv dye. Ordering evap kit off service pointer W10666205E.Also saw signs the FC evap may be leaking. Retuerning with UV drier. Cannot reschedule due to part availability. 3 CT SS JOB; ordrng 1 W11457263 (evaporator) and 1 WPW10608485 (evaporator)
We serviced a
WHIRLPOOL RANGE
Model KCGS356ESS00
Near Rehoboth Beach, DE 19971
Andrew W.
Job Details: 07/13/2022
Cx complaint is burner flames no correct. inspected and verified complaint. cx had a cook over that noticed burners were not igniting correctly. center burner had some build up under the burner cap near the orifice that had the flames not fully coming on. cleaned the build up and tested the burner and the flames came on in full as designed. unit has been fully converted for LP and flames have been adjusted. unit is working as designed. cx paid $120 service call by cc. job complete