Appliance Repair Prince Frederick Maryland

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
WHIRLPOOL DISHWASHER
Model KDTM604KPS
Near Prince Frederick, MD 20678
David J.
Job Details: 10/13/2022
"CX complaint no power to unit at all. Inspected unit and had nothing on UI removed kickplate and tested voltage at terminal block and had 124 V AC going to terminal block when pressed on the white wire the unit powered on found the screw that holds power wire was not tight all the way causing not a good contact for power. retightened, screw and unit was not working. Pulled unit out and removed old heating element and replaced with new stainless steel heating element. play seen it back under counter tested unit. Found no leaks and unit working as it should. JOB COMPLETE"
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Prince Frederick, MD 20678
Shawn D.
Job Details: 06/21/2022
inspected unit for heater and has the gold one on unit. replaced heater and tested no leaks and everything works. unit is good
We serviced a
MAYTAG RANGE
Model MER8700DS1
Near Prince Frederick, MD 20678
Shane B.
Job Details: 06/13/2022
cx complaint is the oven not heating properly and the oven light being out. confirmed complaints. found bake element is OL. found element damaged. interior light bulb is blown and cx tried removing glass cover which shattered. i replaced light assembly with preIDed part. tested unit. all funtions are working. unit is working as designed. cx paid in full for repair.
We serviced a
MAYTAG RANGE
Model MER8700DS1
Near Prince Frederick, MD 20678
Shane B.
Job Details: 06/13/2022
cx complaint is the oven not heating properly and the oven light being out. confirmed complaints. found bake element is OL. found element damaged. interior light bulb is blown and cx tried removing glass cover which shattered. i replaced light assembly with preIDed part. tested unit. all funtions are working. unit is working as designed. cx paid in full for repair.
We serviced a
AMANA WASHER
Model NFW5800HW2
Near Prince Frederick, MD 20678
Shane B.
Job Details: 06/13/2022
"cx complaint is the unit leaving clothes soaking wet at the end of the cycle. found no saved error codes. unit completed spin cycle with no issues. powered unit on in normal operation and found some settings did not have the spin speed set to high, 1 was set to off. i advised cx to check settings frequently beause power outages can cause settings change. she said they have had some outages recently. i called techline to document. they advised not replacing any parts and informing cx to check settings each cycle in case it gets changed. 7733868652 unit is working as desiged."