Appliance Repair Perry Hall Maryland

VIA INC Rated out of 5 stars based on 0 customer reviews

We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS00
Near Perry Hall, MD 21128
Andrew H.
Job Details: 07/15/2022
Replaced ice maker. control and user interface. I had to use the original ice maker harness when replacing the ice maker because the harness that came with a new ice maker didn't match up and this is due to when the door was replaced it may have not been the same door in the same connector. I found when replacing the control board it had an extra connection. And would not dispense water for ice maker and dispenser. I used control I ordered and ran test 120 and 97. Ice maker passed and filled with water.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHB08
Near Perry Hall, MD 21128
Milton J.
Job Details: 07/12/2022
Cx complaint light flickering in RC. Inspected and found the RC door switch was not holding good connection and would cause the RC light to flicker when touched just a little. Installed new RC Door Switch. Unit is now functioning properly. -MJrob
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF560SEHZ02
Near Perry Hall, MD 21128
Milton J.
Job Details: 07/11/2022
"CX complaint unit dripping from water dispenser. Installed new Dual Valve, Filter Housing and Spigot. Still dripping. Ordering new Water Tube, Water Tube, Water Tube, Water Tube Fitting and Reservior. -MJrob; ordrng 1 W11195038 (Water Tube) and 1 W11292468 (Water Tube Fitting) and 1 W10801011 (Reservior) and 1 WPW10463317 (Water Tube) and 1 W10837812 (Water Tube)"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF707ESS01
Near Perry Hall, MD 21128
Andrew H.
Job Details: 07/08/2022
"Replaced compressor, dryer, coupler and RC Evap due to RC Evap leak. I added zip ties to the RC Evap to hold it in place. I pulled unit into a 30-in vacuum and filled to 5.50oz. unit is now working properly"
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Perry Hall, MD 21128
Shane M.
Job Details: 07/07/2022
"cx complaint the unit throwing F8E4. cx said he cleared float switch pan. then raned another cycle, found leaking from left black tube. i tried to start a cycle. water filled then unit sat. no actions. unit needs sump,control, element for SP; ordrng 1 W11416362 (sump) and 1 W11410066 (control) and 1 W11537778 (element)"